HowToSiding.com is supported by readers and may earn an affiliate commission.

Rather have a pro do it for you?

Tools and Supplies to Measure for Siding
1 Tape measure
2 Level
3 Chalk line
4 Speed square
5 Hammer
6 Circular saw
7 Utility knife
8 Tin snips
9 Sawhorses
10 Ladder

How to Measure for Siding

Get Accurate Measurements for Your Siding with These Easy Steps

Measuring for siding can be a daunting task, but with the right approach and technique, it can be a breeze. Here is a step-by-step guide to help you measure for siding.

Step 1: Determine the Square Footage of Your Home

The first step in measuring for siding is to determine the square footage of your home. To do this, measure the length and height of each wall that needs to be covered with siding, then multiply the two numbers together to get the square footage. Add all the square footage numbers together to get the total square footage of your home.

Step 2: Subtract the Square Footage of Doors and Windows

Next, you need to subtract the square footage of any doors and windows that will not be covered with siding. To do this, measure the height and width of each door and window, then multiply the two numbers together to get the square footage. Subtract the total square footage of all the doors and windows from the total square footage of your home.

Step 3: Determine the Number of Siding Panels Needed

Once you have the total square footage of your home, you need to determine the number of siding panels needed. Most siding panels come in standard sizes, so you will need to divide the total square footage by the square footage of each panel to determine how many panels you will need.

Step 4: Measure the Height and Width of Each Wall

Now it's time to measure the height and width of each wall that needs to be covered with siding. Measure from the bottom of the wall to the top for the height, and from one end of the wall to the other for the width. Record these measurements for each wall.

Step 5: Calculate the Amount of Trim Needed

You will also need to calculate the amount of trim needed for your siding project. Measure the length of each corner and the height of each window and door. Multiply these measurements together to get the square footage of trim needed.

Step 6: Add Extra for Waste

Finally, you need to add a little extra to your measurements to account for waste. Siding panels can be damaged during installation or cut incorrectly, so it's always a good idea to order a little extra just in case. Add 10% to your total square footage and trim measurements to ensure you have enough material.

In conclusion, measuring for siding requires careful attention to detail and a little bit of math. By following these steps, you can accurately measure your home for siding and ensure that you order the right amount of materials for your project.