HowToSiding.com is supported by readers and may earn an affiliate commission.

Rather have a pro do it for you?

How to Install Siding on a Mobile Home

Step-by-Step Guide: Installing Siding on Your Mobile Home

Installing siding on a mobile home can be a great way to improve its appearance and protect it from the elements. While the process may seem daunting, it can be accomplished with the right tools and a bit of patience. Here are the steps to follow when installing siding on a mobile home:

1. Measure the area: Before you begin installing siding, you need to measure the area that needs to be covered. This will help you determine how much siding you need to purchase.

2. Remove the old siding: If your mobile home already has siding, you will need to remove it before installing the new siding. This can be done with a pry bar and hammer. Be careful not to damage the underlying structure of the mobile home.

3. Install the starter strip: The starter strip is the first piece of siding that is installed at the bottom of the wall. It is important to make sure that it is level and securely fastened to the mobile home.

4. Install the J-channel: The J-channel is used to hold the siding in place along the edges of windows and doors. It should be installed before the siding is put in place.

5. Install the siding: Begin installing the siding at the bottom of the wall and work your way up. Make sure that each piece of siding is level and securely fastened to the mobile home.

6. Cut the siding as needed: You may need to cut the siding to fit around windows, doors, and other obstacles. This can be done with a circular saw or a utility knife.

7. Install the corner posts: Corner posts are used to cover the corners of the mobile home. They should be installed before the siding is put in place.

8. Install the trim: Trim is used to cover the edges of the siding and give the mobile home a finished look. It should be installed after the siding is in place.

9. Caulk and seal: Once the siding is installed, you should caulk and seal any gaps or seams to prevent water from getting behind the siding.

10. Enjoy your new siding: With the siding installed, your mobile home will look great and be protected from the elements.

By following these steps, you can successfully install siding on your mobile home. Remember to take your time and be careful to ensure that the siding is installed correctly.