is supported by readers and may earn an affiliate commission.

Rather have a pro do it for you?

Tools and Supplies to Install Siding Corner Caps
1 Siding corner caps
2 Measuring tape
3 Level
4 Circular saw
5 Jigsaw
6 Hammer
7 Nails
8 Caulk gun
9 Exterior caulk
10 Safety glasses
11 Work gloves
12 Ladder

How to Install Siding Corner Caps

Step-by-Step Guide: Installing Siding Corner Caps Made Easy

Installing siding corner caps is an important step in completing the exterior of your home. Corner caps provide a clean and finished look to the corners of your siding, while also protecting against moisture and weather damage. Here is a step-by-step guide on how to install siding corner caps:

Step 1: Prepare the Surface
Before installing the corner caps, make sure the surface is clean and free of any debris. Use a pressure washer or hose to remove any dirt or grime. Allow the surface to dry completely before proceeding.

Step 2: Measure and Cut
Measure the length of the corner and cut the corner cap to the appropriate size. Use a miter saw to make precise cuts at a 45-degree angle.

Step 3: Apply Adhesive
Apply a bead of adhesive along the back of the corner cap. Use a caulk gun to apply a continuous and even line of adhesive. Make sure the adhesive is applied to the entire length of the corner cap.

Step 4: Install the Corner Cap
Carefully place the corner cap onto the corner of the siding. Make sure the corner cap is flush against the siding and the top edge is aligned with the top of the siding. Press the corner cap firmly into place to ensure a strong bond with the adhesive.

Step 5: Secure the Corner Cap
Use a nail gun to secure the corner cap in place. Place nails along the top and bottom edges of the corner cap, making sure to space them evenly. Be careful not to overdrive the nails, as this can damage the corner cap.

Step 6: Seal the Edges
Apply a small bead of sealant along the top and bottom edges of the corner cap. This will help to prevent moisture from seeping behind the siding and causing damage.

Step 7: Repeat the Process
Repeat the process for each corner of the house until all corner caps are installed.

In conclusion, installing siding corner caps is a straightforward process that can be completed with a few basic tools and some careful attention to detail. By following these steps, you can ensure a professional-looking finish to your home's exterior while also protecting it from the elements.