HowToSiding.com is supported by readers and may earn an affiliate commission.

Rather have a pro do it for you?

How to Install Siding Around a Chimney

Step-by-Step Guide: Installing Siding Around Your Chimney Made Easy

Installing siding around a chimney can be a challenging task, but with the right tools and techniques, it can be done with ease. Here is a step-by-step guide on how to install siding around a chimney:

Step 1: Prepare the area around the chimney
Before you begin installing siding, it is important to prepare the area around the chimney. This includes removing any existing siding, insulation or debris around the chimney. You should also check for any signs of damage or rot in the wood framing and repair as necessary.

Step 2: Measure and cut the siding
Measure the length and width of the area around the chimney where you will be installing the siding. Cut the siding to the appropriate size using a circular saw or jigsaw.

Step 3: Install the starter strip
The starter strip is the first piece of siding that is installed at the bottom of the wall. It provides a level surface for the rest of the siding to be installed on. Install the starter strip around the entire perimeter of the area where you will be installing the siding.

Step 4: Install the first row of siding
Starting at the bottom of the wall, install the first row of siding. Make sure to leave a small gap between the siding and the chimney to allow for expansion and contraction. Use a level to ensure that the siding is straight and level.

Step 5: Install the second row of siding
Install the second row of siding, making sure to overlap the first row slightly. Use a level to ensure that the siding is straight and level.

Step 6: Install the siding around the chimney
Cut the siding to fit around the chimney, leaving a small gap for expansion and contraction. Use a jigsaw or circular saw to make the necessary cuts. Install the siding around the chimney, making sure to overlap the previous row slightly.

Step 7: Install the final row of siding
Install the final row of siding at the top of the wall. Make sure to leave a small gap between the siding and the chimney to allow for expansion and contraction.

Step 8: Install the trim
Install the trim around the edges of the siding to give it a finished look. Use a nail gun or hammer and nails to secure the trim in place.

Step 9: Caulk and paint
Caulk any gaps between the siding and the chimney to prevent water from seeping in. Once the caulk has dried, paint the siding to match the rest of the house.

In conclusion, installing siding around a chimney may seem like a daunting task, but with the right tools and techniques, it can be done with ease. By following these steps, you can ensure that your siding is installed properly and will last for years to come.